Important: Clean unit before and after each use by washing it with hot soapy water. Rinse with Hot or warm water. Do not use any detergents, chemicals or abrasives material on this.

1. Insert the evacuator (2) into the collecting cylinder (3)
2. Turn on your vacuum
3. Insert the vacuum adapter (1) into the attachment hose on the vacuum

1. Place the child or infant in a sitting /upright position. We recommend holding the child in your lap until he/she feels comfortable with this apparatus.
2. Position the evacuator (2) so that it should fully seal one of the nostrils and hold it there for a couple of seconds while observing the discharge being deposited in the collecting cylinder (3)
3. Repeat the previous step in the same or /or the other nostril as necessary
4. You may gently rotate the evacuator in a circular pattern in steps 2 and 3 to speed up the process
5. When you are finished, turn off the vacuum and clean the apparatus as described above.
6. Repeat this process daily or as needed.


  (1) Vacuum Adapter

  (2) Collecting Cylinder

  (3) Evacuator